Battery terminals
Technical specification |
||
| Size | S | M/L |
| L x H x W |
60 x 15 x 26 mm | 60 x 15 x 26 mm |
| Wire material | Brass | |
| Surface treatment | Tinning | |
| Fasteners | 3 x M6 | 2 x M6 & 1 x M8 |
In order to connect your cables to the battery terminals, we have developed a battery terminal that is a busbar and battery terminal in one.
Our battery terminal is a mix between a busbar and a battery terminal, with space for 4 thick cables without stacking. This allows you to tighten properly and avoid voltage drops.
All contact surfaces are planed and the entire battery terminal is made of tinned brass. Screws, nuts and washers are made of stainless steel (A2).
All our battery terminals are made in Sweden. Don't forget to mount a protective cover on your battery terminal.
For best function:
- Mount only one cable per screw. If the fastening points are not enough, connect a cable to a busbar, and then connect your other cables there instead of on the battery terminal.
- Tighten the cables properly!
- Mount firmly on the lead pole. Push it down proper, but do not tighten to much!
| Art no. | Product | Pole | Maximal dimension | Cable connection |
|---|---|---|---|---|
| E0101 | Battery terminal (S) 35/50 mm² | (-) | 50 mm² | 3 x M6 |
| E0141 | Battery terminal (S) 35/50 mm² | (+) | 50 mm² | 3 x M6 |
| E0131 | Battery terminal (M/L) 35/120 mm² | (-) | 120 mm² | 2 x M6 & 1 x M8 |
| E0161 | Battery terminal (M/L) 35/120 mm² | (+) | 120 mm² | 2 x M6 & 1 x M8 |
|
|
|
|
|
